WBC518v2 Street Performance Camshaft - Triumph GT6 TR250 TR6

$549.95

Jan 2019: After six years of testing customer engines using our WBC518v2 camshaft, we can attest (and have the dyno data to back it up!) that this is the very best TR6 street performance camshaft available.

Idles stabily even at 750RPM with triple Webers... upto 170-185lb ft of torque through the entire power band and 190bhp around 5500-6000RPM with optimal engine configuration.

This is the street performance camshaft that will put a smile on your face - it does everything you want it to do, and your wife won't consider it obnoxious! Development of the the WBC518v2 camshaft started in September 2012 and ran through until the first production batch was ground in January 2013.  Four months of development has seen a marked increase in bottom end torque and a wider power band than the original WBC518, while still retaining the good idle and emissions qualities of the original WBC518. The key to the success of the WBC518v2 camshaft was developing it as a dual pattern cam.  Where all of our previous cams, and all of our competition's cams, are single pattern cams - a dual pattern cam has a uniquely developed intake lobe and a uniquely developed exhaust lobe.  A single pattern cams utilize the the same lobe profile for both the intake and exhaust.  Considering that the cylinder head port dimensions, valve sizes and the port functions are completely different between the intake and exhaust, it doesn't take much to realize there is an advantage in using a dual pattern camshaft that was designed to take advantage of each ports individual features and operating characteristics. The WBC518v2 camshaft has proven so successful, that we've run four production batches so far in 2013 (January, March, April, May).  As with all of our cams, each one is produced from new chilled iron blanks and ground on Landis CNC camshaft grinders (no manual grinding).  We follow-up the grinding with superfinishing of the lobes to produce an exceptional surface that operates with reduced friction and increased life. This camshaft profile can be used with the stock rocker ratio (1.45:1) upto 1.55:1 ratios.  Uprated valve springs are a must, our Performance A (Green stripe) springs are recommended as the camshaft profile(s) were designed around this spring.  WBC camshafts must be used with WBC tappets for proper compatibility between parts (our cams will not be warranted without the use of our tappets).

WBC518v2 Seat Duration Duration @ 0.050"
Tappet Lift
Lobe Lift Gross Valve Lift
1.45:1 Rockers
Gross Valve Lift
1.55:1 Rockers
Intake 272° 227° 0.300" 0.435" 0.465"
Exhaust 272° 219° 0.285" 0.413" 0.442"
Price: $549.95

Related products: