123 TUNE Programmable 6 Cylinder Distributor - GT6, TR250, TR6

$489.95

If you don't have the budget for our Triumph six cylinder crank triggered distributorless ignition, then these programmable 123 TUNE distributors are the next best thing.  They offer extreme flexibility and control over the shape of the advance curves allowing the user to develop an optimal curve for that particular motor.  Tuning of the ignition curve is performed via a laptop PC (Windows XP or newer) and a USB cable that mates to the side port of the 123 TUNE.

$489.95

Adjustable Trailing Arm Bracket Set (with options) - Triumph TR250, TR6

$129.95

Yet another excellent product from Richard Good at Good Parts.  These adjustable trailing arm brackets alleviate much of the misery of correcting the rear suspension camber problems that arise from various different suspension setups. 

We have improved upon Richard's design by offering the brackets with uprated hardware.

$129.95

WBC BigBore Head Gaskets - Triumph GT6, TR250, TR6

$129.95

We manufacture two head gaskets that easily accommodate major over-bores on the Triumph inline-6 engine block.  Both gaskets are manufactured from a very stout compressed fiber over metal core gasket material used exclusively on high performance head gaskets.  The fire rings are stainless steel and the oil passages are ringed with copper crush washers just as the regular head gaskets are.

$129.95

Stainless Steel Fuel Pipe Supporting Clip - Triumph TR250, TR6

$7.95

Have you been searching for a replacement fuel pipe supporting clip for your car, only to find they're unavailable everywhere else?  Well not only do we have them, we have them in durable stainless steel. 
(This is the clip mounted by the water pump that supports the fuel pipe from the pump over to the carbs)

$7.95

Premium Engine Rear Main Seal - MG Midget 1500, Triumph Spitfire, GT6, TR250, TR6

$19.85

This is a premium engine rear main seal.  The seal is a double lip type, offering the typical spring loaded primary sealing lip and a secondary wiper lip on the exterior side of the seal that keeps contaminates (road dust, clutch dust, etc) from migrating towards the primary sealing lip.  The seal body is metal for a solid and secure fit into the seal housing.

$19.85

Premium Engine Timing Cover Seal - MG Midget 1500, Triumph Spitfire 1500, GT6, TR250, TR6

$19.65

This is a premium timing cover oil seal.  The seal is a double lip type, offering the typical spring loaded primary sealing lip and a secondary wiper lip on the exterior side of the seal that keeps contaminates (road dust, clutch dust, etc) from migrating towards the primary sealing lip.  The seal body is metal for a solid and secure fit into the seal housing.

$19.65

WBC Front Engine Plate Gasket - MG Midget 1500, Triumph Spitfire, GT6, TR250, TR6

$9.95

$9.95

WBC Hardened Valve Spring Locator Cup - MG Midget 1500, Triumph Spitfire, GT6, TR250, TR6

$6.00

This is our hardened valve spring locator cup designed specifically to suit the valve springs we sell.  The cup performs two important functions, first it keeps the hardened valve spring from wearing into the soft cast iron of the cylinder head and secondly it provides positive location of the valve spring relative to the valve stem.

$6.00

WBC Triumph 0.800" Diameter Tappets - MG Midget 1500, Spitfire, GT6, TR250 & TR6

$13.50

Wishbone Classics produces the only tappet that meets original Triumph specifications.  Installed into every engine we build in our shop since 2006 and also used successfully by numerous Triumph racers in the USA (1) (2).  This is the only tappet you should use in your engine.

$13.50

GoodParts CV Rear Axles with Uprated Hubs - TR4A, TR250 & TR6

$699.95

One of Richard Good's finest products, these CV jointed rear axles with uprated hubs solve a multitude of durability and safety issues that plague the original TR IRS rear axle and hub design. 

$699.95
Syndicate content